1/48 Eduard Albatros DV with Aviattic "lozenge" decal set by David Ulke - based on article in "Iron Cross" magazine
1/48 "lozenge" decals for Eduard Albatros DVa...2 sets to each sheet!
Minor alterations to either kit parts or decals are required :
1/48th Albie decals for the Eduard DV/DVa scaled down from the popular 1/32 set based on the accurate WNW kit.
As a result a couple of small tweaks are necessary:
1) If not cutting ailerons and elevator from the kit for more realistic positioning you'll need to remove the decal rib tapes along the hinge edges.
2) the leading edge rib tape on undersurface of bottom wings needs to be added from the rib tape decal (white backed) providers
3) radiator cutouts need to be enlarged towards trailing edge and "fold down" tapes on sides removed
4) Add tapes where required sliced from supplied "white backed" material
See reference photos, cut decal exactly to size and offer to kit parts before adjusting and application.
Two different sets to a sheet.
Eduard 1/48 Albatros DVa by Mark Phillips.
ATT48040 Albatros DVa 5 colour "lozenge" for flying surfaces (blue and pink tapes)
1/48th Albie decals for the Eduard DV/DVa scaled down from the popular 1/32 set based on the accurate WNW kit.
As a result a couple of small tweaks are necessary.
1) If not cutting ailerons and elevator from the kit for more realistic positioning you'll need to remove the decal rib tapes along the hinge edges.
2) the leading edge rib tape on undersurface of bottom wings needs to be added from the rib tape decal (white backed) providers
3) radiator cutouts need to be enlarged towards trailing edge and "fold down" tapes on sides removed
4) Add tapes where required sliced from supplied "white backed" material
See reference photos
Two different sets to a sheet.
As a result a couple of small tweaks are necessary.
1) If not cutting ailerons and elevator from the kit for more realistic positioning you'll need to remove the decal rib tapes along the hinge edges.
2) the leading edge rib tape on undersurface of bottom wings needs to be added from the rib tape decal (white backed) providers
3) radiator cutouts need to be enlarged towards trailing edge and "fold down" tapes on sides removed
4) Add tapes where required sliced from supplied "white backed" material
See reference photos
Two different sets to a sheet.
ATT48041 Albatros DVa 5 colour "lozenge" for flying surfaces (blue/pink and lozenge tapes)
1/48th Albie decals scaled down fro the Eduard DV/Va from the popular 1/32 set based on the accurate WNW kit.
As a result a couple of small tweaks are necessary.
1) If not cutting ailerons and elevator from the kit for more realistic positioning you'll need to remove the decal rib tapes along the hinge edges.
2) the leading edge rib tape on undersurface of bottom wings needs to be added from the rib tape decal (white backed) providers
3) radiator cutouts need to be enlarged towards trailing edge and "fold down" tapes on sides removed
4) Add tapes where required sliced from supplied "white backed" material
See reference photos
Two different sets to a sheet.
As a result a couple of small tweaks are necessary.
1) If not cutting ailerons and elevator from the kit for more realistic positioning you'll need to remove the decal rib tapes along the hinge edges.
2) the leading edge rib tape on undersurface of bottom wings needs to be added from the rib tape decal (white backed) providers
3) radiator cutouts need to be enlarged towards trailing edge and "fold down" tapes on sides removed
4) Add tapes where required sliced from supplied "white backed" material
See reference photos
Two different sets to a sheet.