1/72 "streaking" decals for Fokker DR.I and F.I
Minor alterations may be required depending on kit accuracy...
1/72 Fokker DR.I and F.I sets are reduced from 1/32 Roden kit templates, which are accurate to the most recent "Windsock" (Albatros Productions) drawings.
The Eduard kit of the triplane has a couple of idiosyncrasies that you will need to correct for the decals to fit.
1) For added realism, remove ailerons and elevator from wings and tailplane. This will allow the decals to "fold under" into the recesses as intended. Otherwise, these slivers of decal will need to be removed. Then re-attach the parts set at realistic angles.
2) The Eduard horizontal stabiliser is fractionally oversized - as are the elevators. Cut decals to size and offer up (dry) before applying to determine how much plastic to remove.
3) Remove moulded breather pipes from both sides of fuselage and re-instate after decalling fuselage sides.
4) Remove moulded aileron and elevator horns, then decal and reinstate afterwards with p/e alternatives or scrap plastic
5) Trimming of the wing caps (ends) may be necessary, after they have dried and conformed with chosen solutions, with a very sharp razor blade.
Eduard 1/72 Fokker DR.I with Aviattic decals. Exquisite work from customer Andrea Brenco.
Eduard 1/72 Fokker DR.I with Aviattic streaking decals and red areas painted - fine work from Nigel Rayner.
ATT72029 (Clear decal paper) WW1 Fokker "streaked" camouflage on clear and unbleached linen
Developed with renowned aviation artist Juanita Franzi these decals are available with clear background or on "unbleached linen" and simulate the hand-painted brushed camouflage as seen on Fokker aircraft from 1916-18.
Check your references for your particular subject's camouflage "footprint" - no two aircraft were the same!
Check your references for your particular subject's camouflage "footprint" - no two aircraft were the same!
ATT72030 (clear decal paper) WW1 "streaked" camouflage for Fokker DR.I (x 3) and F.I (x1)
Contains three full sets with interior details for DR.I and one F.I
On clear decal for your choice of gloss background colour
Scaled down from our 1/32 set there are a couple of minor adjustments to be made to the Eduard kit.
On clear decal for your choice of gloss background colour
Scaled down from our 1/32 set there are a couple of minor adjustments to be made to the Eduard kit.